Merchandise Description

Solution Description

 

Firm Profile

In 2571, HangZhou CZPT Equipment Co.,ltd was set up by Ms. Iris and her 2 companions(Mr. Tian and Mr. Yang) in HangZhou metropolis(ZHangZhoug province, China), all 3 Founders are engineers who have far more than averaged 30 many years of expertise. Then due to the fact the needs of enterprise expansion, in 2014, it moved to the present Xihu (West Lake) Dis. Industrial Zone (HangZhou city, ZHangZhoug province, China).

Via our nicely-identified model ND, CZPT Equipment provides agricultural solutions to agriculture equipment company and distributors throughout the world via a entire line of spiral bevel gearboxes, straight bevel gearboxes, spur gearboxes, push shafts, sheet steel, hydraulic cylinder, motors, tyre, worm gearboxes, worm operators etc. Goods can be customized as ask for.

We, CZPT equipment proven a comprehensive good quality management system and income support community to supply consumers with higher-high quality products and satisfactory provider. Our merchandise are marketed in forty provinces and municipalities in China and 36 countries and areas in the world, our principal marketplace is the European market place.

Certifications

Our Factory

Sample Place

Why select us?

1) Customization: With a strong R&D group, and we can produce products as necessary. It only will take up to 7 days for us to layout a set of drawings. The generation time for new items is normally fifty days or considerably less.

2) Top quality: We have our very own full inspection and screening products, which can make certain the top quality of the merchandise.

3) Ability: Our once-a-year creation capacity is over five hundred,000 sets, also, we also take little amount orders, to meet up with the wants of diverse customer’s buy portions.

four) Provider: We focus on providing higher-quality merchandise. Our merchandise are in line with global standards and are primarily exported to Europe, Australia, and other nations around the world and areas.

5) Cargo: We are shut to HangZhou and ZheJiang ports, to offer the fastest shipping and delivery provider.
 

Packaging & Transport

FAQ

Q: Are you a buying and selling organization or company?
A: We are manufacturing facility and providing gearbox ODM & OEM solutions for the European market place for more than ten a long time

Q: Do you supply samples? is it free of charge or additional?
A: Indeed, we could supply the sample for cost-free charge but do not shell out the expense of freight.

Q: How prolonged is your supply time? What is your phrases of payment?
A: Generally it is forty-forty five times. The time may vary depending on the solution and the stage of customization.
For normal goods, the payment is: thirty% T/T in progress,harmony before shipment.

Q: What is the precise MOQ or price tag for your merchandise?
A: As an OEM business, we can provide and adapt our items to a wide assortment of requirements.
Hence, MOQ and cost may tremendously differ with dimension, content and more specifications For instance, high priced items or common products will typically have a lower MOQ. You should make contact with us with all appropriate information to get the most correct quotation.

If you have yet another concern, you should come to feel free to speak to us.

US $280
/ Piece
|
50 Pieces

(Min. Order)

###

Application: Machinery, Agricultural Machinery, Lawn Mower/Grass Rotary Cutter/Agriculture Slasher
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Straight Bevel
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Single-Step

###

Customization:
US $280
/ Piece
|
50 Pieces

(Min. Order)

###

Application: Machinery, Agricultural Machinery, Lawn Mower/Grass Rotary Cutter/Agriculture Slasher
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Straight Bevel
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Single-Step

###

Customization:

How to Design a Forging Spur Gear

Before you start designing your own spur gear, you need to understand its main components. Among them are Forging, Keyway, Spline, Set screw and other types. Understanding the differences between these types of spur gears is essential for making an informed decision. To learn more, keep reading. Also, don’t hesitate to contact me for assistance! Listed below are some helpful tips and tricks to design a spur gear. Hopefully, they will help you design the spur gear of your dreams.
Gear

Forging spur gears

Forging spur gears is one of the most important processes of automotive transmission components. The manufacturing process is complex and involves several steps, such as blank spheroidizing, hot forging, annealing, phosphating, and saponification. The material used for spur gears is typically 20CrMnTi. The process is completed by applying a continuous through extrusion forming method with dies designed for the sizing band length L and Splitting angle thickness T.
The process of forging spur gears can also use polyacetal (POM), a strong plastic commonly used for the manufacture of gears. This material is easy to mold and shape, and after hardening, it is extremely stiff and abrasion resistant. A number of metals and alloys are used for spur gears, including forged steel, stainless steel, and aluminum. Listed below are the different types of materials used in gear manufacturing and their advantages and disadvantages.
A spur gear’s tooth size is measured in modules, or m. Each number represents the number of teeth in the gear. As the number of teeth increases, so does its size. In general, the higher the number of teeth, the larger the module is. A high module gear has a large pressure angle. It’s also important to remember that spur gears must have the same module as the gears they are used to drive.

Set screw spur gears

A modern industry cannot function without set screw spur gears. These gears are highly efficient and are widely used in a variety of applications. Their design involves the calculation of speed and torque, which are both critical factors. The MEP model, for instance, considers the changing rigidity of a tooth pair along its path. The results are used to determine the type of spur gear required. Listed below are some tips for choosing a spur gear:
Type A. This type of gear does not have a hub. The gear itself is flat with a small hole in the middle. Set screw gears are most commonly used for lightweight applications without loads. The metal thickness can range from 0.25 mm to 3 mm. Set screw gears are also used for large machines that need to be strong and durable. This article provides an introduction to the different types of spur gears and how they differ from one another.
Pin Hub. Pin hub spur gears use a set screw to secure the pin. These gears are often connected to a shaft by dowel, spring, or roll pins. The pin is drilled to the precise diameter to fit inside the gear, so that it does not come loose. Pin hub spur gears have high tolerances, as the hole is not large enough to completely grip the shaft. This type of gear is generally the most expensive of the three.
Gear

Keyway spur gears

In today’s modern industry, spur gear transmissions are widely used to transfer power. These types of transmissions provide excellent efficiency but can be susceptible to power losses. These losses must be estimated during the design process. A key component of this analysis is the calculation of the contact area (2b) of the gear pair. However, this value is not necessarily applicable to every spur gear. Here are some examples of how to calculate this area. (See Figure 2)
Spur gears are characterized by having teeth parallel to the shafts and axis, and a pitch line velocity of up to 25 m/s is considered high. In addition, they are more efficient than helical gears of the same size. Unlike helical gears, spur gears are generally considered positive gears. They are often used for applications in which noise control is not an issue. The symmetry of the spur gear makes them especially suitable for applications where a constant speed is required.
Besides using a helical spur gear for the transmission, the gear can also have a standard tooth shape. Unlike helical gears, spur gears with an involute tooth form have thick roots, which prevents wear from the teeth. These gears are easily made with conventional production tools. The involute shape is an ideal choice for small-scale production and is one of the most popular types of spur gears.

Spline spur gears

When considering the types of spur gears that are used, it’s important to note the differences between the two. A spur gear, also called an involute gear, generates torque and regulates speed. It’s most common in car engines, but is also used in everyday appliances. However, one of the most significant drawbacks of spur gears is their noise. Because spur gears mesh only one tooth at a time, they create a high amount of stress and noise, making them unsuitable for everyday use.
The contact stress distribution chart represents the flank area of each gear tooth and the distance in both the axial and profile direction. A high contact area is located toward the center of the gear, which is caused by the micro-geometry of the gear. A positive l value indicates that there is no misalignment of the spline teeth on the interface with the helix hand. The opposite is true for negative l values.
Using an upper bound technique, Abdul and Dean studied the forging of spur gear forms. They assumed that the tooth profile would be a straight line. They also examined the non-dimensional forging pressure of a spline. Spline spur gears are commonly used in motors, gearboxes, and drills. The strength of spur gears and splines is primarily dependent on their radii and tooth diameter.
SUS303 and SUS304 stainless steel spur gears

Stainless steel spur gears are manufactured using different techniques, which depend on the material and the application. The most common process used in manufacturing them is cutting. Other processes involve rolling, casting, and forging. In addition, plastic spur gears are produced by injection molding, depending on the quantity of production required. SUS303 and SUS304 stainless steel spur gears can be made using a variety of materials, including structural carbon steel S45C, gray cast iron FC200, nonferrous metal C3604, engineering plastic MC901, and stainless steel.
The differences between 304 and 303 stainless steel spur gears lie in their composition. The two types of stainless steel share a common design, but have varying chemical compositions. China and Japan use the letters SUS304 and SUS303, which refer to their varying degrees of composition. As with most types of stainless steel, the two different grades are made to be used in industrial applications, such as planetary gears and spur gears.
Gear

Stainless steel spur gears

There are several things to look for in a stainless steel spur gear, including the diametral pitch, the number of teeth per unit diameter, and the angular velocity of the teeth. All of these aspects are critical to the performance of a spur gear, and the proper dimensional measurements are essential to the design and functionality of a spur gear. Those in the industry should be familiar with the terms used to describe spur gear parts, both to ensure clarity in production and in purchase orders.
A spur gear is a type of precision cylindrical gear with parallel teeth arranged in a rim. It is used in various applications, such as outboard motors, winches, construction equipment, lawn and garden equipment, turbine drives, pumps, centrifuges, and a variety of other machines. A spur gear is typically made from stainless steel and has a high level of durability. It is the most commonly used type of gear.
Stainless steel spur gears can come in many different shapes and sizes. Stainless steel spur gears are generally made of SUS304 or SUS303 stainless steel, which are used for their higher machinability. These gears are then heat-treated with nitriding or tooth surface induction. Unlike conventional gears, which need tooth grinding after heat-treating, stainless steel spur gears have a low wear rate and high machinability.

China Chinese Factory ND Transmission Gear Speed Ratio Suitable for Rotary Cultivation Machine Output Gearbox Agricultural Spare Parts     top gearChina Chinese Factory ND Transmission Gear Speed Ratio Suitable for Rotary Cultivation Machine Output Gearbox Agricultural Spare Parts     top gear
editor by czh 2022-12-19

Herring Bone Gear

As one of the herringbone gear manufacturers, suppliers, and exporters of mechanical products, We offer herringbone gear and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of herringbone gear.

Recent Posts