Product Description

CZPT is 1 of the earliest and most famous companies, which is specialized in manufacturing and selling parts of motorcycles.
Our products are in great variety, and we have got the intellectual property rights in the trademark YOG, which is CZPT all over the nation and even the world.

After 20 years’experience of new products’research and development, quality control, and corporate management, the trademark CZPT is supported by our powerful technology and its quality is firmly assured.
At the same time, the series products of our company have become the representation of optimum quality compared with our competitors.
The annual sales keep growing and our company has been designated as the original equipment manufacturer by many motorcycle manufacture corporations.
We have always pursued a policy of steady quality and excellent after-sell service and we have set up a good reputation in motorcycle parts market.

We will supply the best products to our customer domestic and oversea with low price but high spead.
The company will serve all the customers through innovative research and development.
We will take customers’s satisfactions as our objective for operation development, so as to enable our series of products to be sold throughout the world.

SPARE PART FOR FULL RANGE MODELS:
SPARE PART FOR BAJAJ:
SPARE PART FOR BAJAJ BOXER CT100,SPARE PART FOR BAJAJ BOXER BM100,SPARE PART FOR BAJAJ BOXER BM150,SPARE PART FOR BAJAJ PULSAR135,SPARE PART FOR BAJAJ PULSAR150,SPARE PART FOR BAJAJ PULSAR180,SPARE PART FOR BAJAJ PULSAR200,SPARE PART FOR BAJAJ PULSAR220,SPARE PART FOR BAJAJ DISCOVER125,SPARE PART FOR BAJAJ DISCOVER135,SPARE PART FOR BAJAJ XCD125,SPARE PART FOR BAJAJ 2T 3W,SPARE PART FOR BAJAJ 4T 3W,SPARE PART FOR BAJAJ TORIO 4S,SPARE PART FOR PLATINA
 
SPARE PART FOR TVS:
SPARE PART FOR TVS STAR,SPARE PART FOR  TVS STAR LX,SPARE PART FOR TVS STAR CITY,SPARE PART FOR TVS MAX,SPARE PART FOR TVS SPORT,SPARE PART FOR TVS STAR HLX 100/125,SPARE PART FOR TVS STAR SPORT 125ES,SPARE PART FOR TVS APACHE, SPARE PART FOR TVS CZPT GLX125
 
SPARE PART FOR HONDA:
SPARE PART FOR CG125,SPARE PART FOR CG150,SPARE PART FOR CG200,SPARE PART FOR BIZ125,SPARE PART FOR  WAVE110, SPARE PART FOR CGL125,SPARE PART FOR TITAN,SPARE PART FOR CG150 FAN,SPARE PART FOR CARGO,SPARE PART FOR BROS, SPARE PART FOR JH70
 
SPARE PART FOR SUZUKI:
SPARE PART FOR AX100,SPARE PART FOR  GN125,SAPRE PART FOR GN125H,SPARE PART FOR EN125,SPARE PART FOR AN125
 
SPARE PART FOR YAMAHA:
SPARE PART FOR YBR125,SPARE PART FOR  BWS125,SPARE PART FOR YB100,SPARE PART FOR  CRYPTON,SPARE PART FOR JOG50
 
SPARE PART FOR ITALIKA:
SPARE PART FOR AT110,SPARE PART FOR  FT110,SPARE PART FOR  FT125,SPARE PART FOR FT150,SPARE PART FOR WS150,SPARE PART FOR CS125,SPARE PART FOR DS150,SPARE PART FOR FT180, SPARE PART FOR WS175,SPARE PART FOR ST70,SPARE PART FOR ST90,SPARE PART FOR DM150,SPARE PART FOR DM200
 
SPARE PART FOR AKT MOTOS:
SPARE PART FOR AKT110,SPARE PART FOR AK125,SPARE PART FOR AKT125,SPARE PART FOR AKT125 MKD,SPARE PART FOR AKT125 TT,SPARE PART FOR AKT EVO
 
SPARE PART FOR KEEWAY:
SPARE PART FOR HORSE125,SPARE PART FOR  OWEN125,SPARE PART FOR  ARSEN150,SPARE PART FOR  OUTLOOK150,SPARE PART FOR TX200
 
SPARE PART FOR CHINESE MODEL:
SPARE PART FOR LIFAN, SPARE PART FOR LONCIN,SPARE PART FOR  ZONGSHEN,SPARE PART FOR  KYNGO,SPARE PART FOR KYMCO, SPARE PART FOR TAYO,SPARE PART FOR HAOJUE,SPARE PART FOR HAOJIN,SPARE PART FOR HangZhou,SPARE PART FOR XIHU (WEST LAKE) DIS., SHINERAY

Type: Motorcycle Speedometer Gear
Certification: ISO9001: 2000, CCC, CE
Material: Alloy
Transport Package: Polybag and Colour Box
Specification: 300 set/ctn
Trademark: YOG
Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Gear

Hypoid Bevel Vs Straight Spiral Bevel – What’s the Difference?

Spiral gears come in many different varieties, but there is a fundamental difference between a Hypoid bevel gear and a Straight spiral bevel. This article will describe the differences between the two types of gears and discuss their use. Whether the gears are used in industrial applications or at home, it is vital to understand what each type does and why it is important. Ultimately, your final product will depend on these differences.

Hypoid bevel gears

In automotive use, hypoid bevel gears are used in the differential, which allows the wheels to rotate at different speeds while maintaining the vehicle’s handling. This gearbox assembly consists of a ring gear and pinion mounted on a carrier with other bevel gears. These gears are also widely used in heavy equipment, auxiliary units, and the aviation industry. Listed below are some common applications of hypoid bevel gears.
For automotive applications, hypoid gears are commonly used in rear axles, especially on large trucks. Their distinctive shape allows the driveshaft to be located deeper in the vehicle, thus lowering the center of gravity and minimizing interior disruption. This design makes the hypoid gearset one of the most efficient types of gearboxes on the market. In addition to their superior efficiency, hypoid gears are very easy to maintain, as their mesh is based on sliding action.
The face-hobbed hypoid gears have a characteristic epicycloidal lead curve along their lengthwise axis. The most common grinding method for hypoid gears is the Semi-Completing process, which uses a cup-shaped grinding wheel to replace the lead curve with a circular arc. However, this method has a significant drawback – it produces non-uniform stock removal. Furthermore, the grinding wheel cannot finish all the surface of the tooth.
The advantages of a hypoid gear over a spiral bevel gear include a higher contact ratio and a higher transmission torque. These gears are primarily used in automobile drive systems, where the ratio of a single pair of hypoid gears is the highest. The hypoid gear can be heat-treated to increase durability and reduce friction, making it an ideal choice for applications where speed and efficiency are critical.
The same technique used in spiral bevel gears can also be used for hypoid bevel gears. This machining technique involves two-cut roughing followed by one-cut finishing. The pitch diameter of hypoid gears is up to 2500 mm. It is possible to combine the roughing and finishing operations using the same cutter, but the two-cut machining process is recommended for hypoid gears.
The advantages of hypoid gearing over spiral bevel gears are primarily based on precision. Using a hypoid gear with only three arc minutes of backlash is more efficient than a spiral bevel gear that requires six arc minutes of backlash. This makes hypoid gears a more viable choice in the motion control market. However, some people may argue that hypoid gears are not practical for automobile assemblies.
Hypoid gears have a unique shape – a cone that has teeth that are not parallel. Their pitch surface consists of two surfaces – a conical surface and a line-contacting surface of revolution. An inscribed cone is a common substitute for the line-contact surface of hypoid bevel gears, and it features point-contacts instead of lines. Developed in the early 1920s, hypoid bevel gears are still used in heavy truck drive trains. As they grow in popularity, they are also seeing increasing use in the industrial power transmission and motion control industries.
Gear

Straight spiral bevel gears

There are many differences between spiral bevel gears and the traditional, non-spiral types. Spiral bevel gears are always crowned and never conjugated, which limits the distribution of contact stress. The helical shape of the bevel gear is also a factor of design, as is its length. The helical shape has a large number of advantages, however. Listed below are a few of them.
Spiral bevel gears are generally available in pitches ranging from 1.5 to 2500 mm. They are highly efficient and are also available in a wide range of tooth and module combinations. Spiral bevel gears are extremely accurate and durable, and have low helix angles. These properties make them excellent for precision applications. However, some gears are not suitable for all applications. Therefore, you should consider the type of bevel gear you need before purchasing.
Compared to helical gears, straight bevel gears are easier to manufacture. The earliest method used to manufacture these gears was the use of a planer with an indexing head. However, with the development of modern manufacturing processes such as the Revacycle and Coniflex systems, manufacturers have been able to produce these gears more efficiently. Some of these gears are used in windup alarm clocks, washing machines, and screwdrivers. However, they are particularly noisy and are not suitable for automobile use.
A straight bevel gear is the most common type of bevel gear, while a spiral bevel gear has concave teeth. This curved design produces a greater amount of torque and axial thrust than a straight bevel gear. Straight teeth can increase the risk of breaking and overheating equipment and are more prone to breakage. Spiral bevel gears are also more durable and last longer than helical gears.
Spiral and hypoid bevel gears are used for applications with high peripheral speeds and require very low friction. They are recommended for applications where noise levels are essential. Hypoid gears are suitable for applications where they can transmit high torque, although the helical-spiral design is less effective for braking. For this reason, spiral bevel gears and hypoids are generally more expensive. If you are planning to buy a new gear, it is important to know which one will be suitable for the application.
Spiral bevel gears are more expensive than standard bevel gears, and their design is more complex than that of the spiral bevel gear. However, they have the advantage of being simpler to manufacture and are less likely to produce excessive noise and vibration. They also have less teeth to grind, which means that they are not as noisy as the spiral bevel gears. The main benefit of this design is their simplicity, as they can be produced in pairs, which saves money and time.
In most applications, spiral bevel gears have advantages over their straight counterparts. They provide more evenly distributed tooth loads and carry more load without surface fatigue. The spiral angle of the teeth also affects thrust loading. It is possible to make a straight spiral bevel gear with two helical axes, but the difference is the amount of thrust that is applied to each individual tooth. In addition to being stronger, the spiral angle provides the same efficiency as the straight spiral gear.
Gear

Hypoid gears

The primary application of hypoid gearboxes is in the automotive industry. They are typically found on the rear axles of passenger cars. The name is derived from the left-hand spiral angle of the pinion and the right-hand spiral angle of the crown. Hypoid gears also benefit from an offset center of gravity, which reduces the interior space of cars. Hypoid gears are also used in heavy trucks and buses, where they can improve fuel efficiency.
The hypoid and spiral bevel gears can be produced by face-hobbing, a process that produces highly accurate and smooth-surfaced parts. This process enables precise flank surfaces and pre-designed ease-off topographies. These processes also enhance the mechanical resistance of the gears by 15 to 20%. Additionally, they can reduce noise and improve mechanical efficiency. In commercial applications, hypoid gears are ideal for ensuring quiet operation.
Conjugated design enables the production of hypoid gearsets with length or profile crowning. Its characteristic makes the gearset insensitive to inaccuracies in the gear housing and load deflections. In addition, crowning allows the manufacturer to adjust the operating displacements to achieve the desired results. These advantages make hypoid gear sets a desirable option for many industries. So, what are the advantages of hypoid gears in spiral gears?
The design of a hypoid gear is similar to that of a conventional bevel gear. Its pitch surfaces are hyperbolic, rather than conical, and the teeth are helical. This configuration also allows the pinion to be larger than an equivalent bevel pinion. The overall design of the hypoid gear allows for large diameter shafts and a large pinion. It can be considered a cross between a bevel gear and a worm drive.
In passenger vehicles, hypoid gears are almost universal. Their smoother operation, increased pinion strength, and reduced weight make them a desirable choice for many vehicle applications. And, a lower vehicle body also lowers the vehicle’s body. These advantages made all major car manufacturers convert to hypoid drive axles. It is worth noting that they are less efficient than their bevel gear counterparts.
The most basic design characteristic of a hypoid gear is that it carries out line contact in the entire area of engagement. In other words, if a pinion and a ring gear rotate with an angular increment, line contact is maintained throughout their entire engagement area. The resulting transmission ratio is equal to the angular increments of the pinion and ring gear. Therefore, hypoid gears are also known as helical gears.

China Custom CZPT Motorcycle Spare Parts Speedometer Gear for Bajaj Bm150, Bajaj Boxer, CB125ace   wholesaler China Custom CZPT Motorcycle Spare Parts Speedometer Gear for Bajaj Bm150, Bajaj Boxer, CB125ace   wholesaler
editor by CX 2023-04-25

Herring Bone Gear

As one of the herringbone gear manufacturers, suppliers, and exporters of mechanical products, We offer herringbone gear and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of herringbone gear.

Recent Posts