Product Description

1) According to the different strength and performance, we choose the steel with strong compression;
2) Using Germany professional software and our professional engineers to design products with more reasonable size and better performance; 3) We can customize our products according to the needs of our customers,Therefore, the optimal performance of the gear can be exerted under different working conditions;
4) Quality assurance in every step to ensure product quality is controllable.

 

Product Paramenters

 

 
   DRIVEN GEAR

NUMBER OF TEETH

17

MODULE

10.3572

LENTH

316

OUTER DIAMETER

ø180

DIRECTION OF SPIRAL

L

ACCURACY OF SPLINE

M33*1.5-6h

NUMBER OF SPLINE

46

DRIVEN GEAR

NUMBER OF TEETH

28

OUTER DIAMETER

ø292

DIAMETER OF INNER HOLE

ø190

ACCURACY OF SCREW

16-M16*1.5-6H

CENTER DISTANCE OF SCREW HOLE

ø220

DIRECTION OF SPIRAL

R

Company Profiles

Our company,HangZhou CHINAMFG Gear co.,Ltd , specialized in Hypoid and spiral bevel gear used in Automotive industry, was foundeded in 1996, with registered capital 136,8 square meter, with building area of 72,000 square meters. More than 500 employees work in our company.
 We own more than 560 high-precise machining equipments, 10 Klingelnberg Oerlikon gear production lines, 36 Gleason gear production lines, 5 forging production lines 2 german Aichilin and 5 CHINAMFG CHINAMFG advanced automatic continuous heat treatment production lines. With the introducing the advanced Oerlikon C50 and P65 measuring center, we enhence our technology level and improve our product quality a lot. We offer better quality  and good after-sale service with low price, which insure the good reputation. With the concept of “for the people, by technology, creativity, for the society, transfering friendship, honest”, we are trying to provice the world-top level product.
Our aim is: CHINAMFG Gear,world class, Drive the world.
According to the different strength and performance, we choose the steel with strong compression;Using Germany professional software and our professional engineers to design products with more reasonable size and better performance;We can customize our products according to the needs of our customers,Therefore, the optimal performance of the gear can be exerted under different working conditions;Quality assurance in every step to ensure product quality is controllable.
Our company had full quality management system and had been certified by ISO9001:2000, QS-9000:1998, ISO/TS16949 , which insure the entrance of international market.

Certification & honors

Quality Management

Adopt PDCA for problem solution, to ensure a closed loop.

Packaging & Shipping

Packaging Detail:standard package(carton ,wooden pallet).
Shipping:Support Sea freight. Accept FOB,EXW,FAS,DES. 

 

Cooperative customers

HangZhou CHINAMFG Gear Co., Ltd. adheres to the concept of “people-oriented, prosper with science and technology; create high-quality products, contribute to the society; turn friendship, and contribute sincerely”, and will strive to create world automotive axle spiral bevel gear products.


1.Do you provide samples?
Yes,we can offer free sample but not pay the cost of freight.
2.What about OEM?
Yes,we can do OEM according to your requirements.
3.How about after-sales service?
We have excellent after-sales service if you have any quanlity problem,you can contact us anytime.
4.What about package?
Stardard package or customized package as requirements.
5.How to ensure the quanlity of the products?
We can provide raw meterial report,metallographic examination and the accuracy testing etc.
6.How long is your delivery time?
Genarally it is 4-7 days.If customized it will be take 20 days according to your quantity.

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Gear Position: External Gear
Manufacturing Method: Cast Gear
Toothed Portion Shape: Herringbone Gear
Material: Cast Steel
Samples:
US$ 80/Set
1 Set(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

herringbone gear

What is the lifespan of a typical herringbone gear?

The lifespan of a typical herringbone gear can vary depending on various factors such as operating conditions, load requirements, material quality, maintenance practices, and the specific application. While it is challenging to provide an exact lifespan, here’s a detailed explanation of factors that can influence the lifespan of a herringbone gear:

  • Material Quality: The choice of material for herringbone gears greatly affects their lifespan. High-quality materials with excellent mechanical properties, such as alloy steels or through-hardened steels, are commonly used for herringbone gears. These materials offer good wear resistance, high strength, and improved durability, contributing to a longer gear lifespan.
  • Load and Torque: The magnitude and type of load applied to herringbone gears impact their lifespan. Higher loads and torque levels can accelerate wear and fatigue, shortening the gear lifespan. Properly selecting herringbone gears with an appropriate torque capacity for the specific application is essential to ensure optimal gear performance and longevity.
  • Operating Conditions: The operating conditions, such as temperature, speed, lubrication, and environmental factors, play a significant role in determining the gear lifespan. Adequate lubrication with the right type and amount of lubricant helps reduce friction, wear, and heat generation, extending the gear lifespan. Harsh operating conditions, such as high temperatures or corrosive environments, can accelerate wear and decrease the lifespan of herringbone gears.
  • Maintenance Practices: Regular maintenance and inspection procedures are crucial for maximizing the lifespan of herringbone gears. Scheduled maintenance activities, including lubricant replacement, gear tooth inspection, and alignment checks, help identify and address any potential issues before they can cause significant damage. Timely maintenance and prompt resolution of detected problems contribute to extending the gear lifespan.
  • System Design: The overall system design, including factors such as gear alignment, stiffness, and load distribution, can impact the gear lifespan. Proper gear alignment ensures even load distribution and reduces unnecessary stress on the gear teeth, enhancing their durability. A well-designed gearbox with adequate housing support, shafts, and bearings contributes to a longer gear lifespan by minimizing vibrations, deflection, and misalignment.

Considering the above factors, herringbone gears are known for their durability and ability to handle high loads. With proper material selection, suitable operating conditions, regular maintenance, and a well-designed system, herringbone gears can have a long lifespan. However, it is important to note that the lifespan of a herringbone gear is highly dependent on the specific application and operating conditions, and it may vary from one situation to another.

herringbone gear

How do you maintain and service a herringbone gear system?

Maintaining and servicing a herringbone gear system is crucial for ensuring its optimal performance, longevity, and reliability. Regular maintenance and service activities help identify and address potential issues, minimize wear, and extend the lifespan of the gear system. Here’s a detailed explanation of how to maintain and service a herringbone gear system:

  1. Inspection: Conduct regular visual inspections of the gear system to identify any signs of wear, damage, or misalignment. Inspect the gear teeth, shafts, bearings, and other components for any visible abnormalities, such as pitting, scoring, cracks, or excessive wear. Check for oil leaks, loose fasteners, or any other potential issues that may affect the gear system’s performance.
  2. Lubrication: Ensure that the lubrication of the herringbone gear system is adequate and meets the manufacturer’s recommendations. Monitor the lubricant level and condition regularly. Check for proper lubricant distribution and coverage on the gear teeth and contact surfaces. Replenish or replace the lubricant as necessary to maintain the required film thickness and lubricating properties.
  3. Alignment and Clearance: Check and maintain proper shaft alignment to prevent misalignment-related issues. Use alignment tools such as dial indicators or laser alignment systems to verify the parallelism and concentricity of the gear system shafts. Ensure that the gear engagement is correct and that there is appropriate gear backlash. Make any necessary adjustments to optimize gear alignment and clearance as per the manufacturer’s guidelines.
  4. Fasteners and Connections: Regularly inspect and tighten all fasteners, such as bolts, set screws, or clamps, to ensure that they are securely fastened. Loose fasteners can lead to misalignment, vibration, and potential gear system failure. Follow the recommended torque specifications provided by the manufacturer when tightening the fasteners to avoid over-tightening or under-tightening.
  5. Monitoring and Analysis: Implement a monitoring and analysis program to track the performance of the herringbone gear system over time. This can include vibration analysis, temperature monitoring, and oil analysis. These techniques can help identify any abnormal conditions, such as excessive vibration, increased temperatures, or the presence of contaminants or wear particles in the lubricant. Regular analysis and monitoring can aid in detecting potential issues early and taking appropriate corrective actions.
  6. Repair and Replacement: If any signs of wear, damage, or abnormal conditions are detected during inspections or monitoring, take prompt action to address the issues. Depending on the severity of the problem, this may involve repairing or replacing worn or damaged components, such as gear teeth, bearings, or seals. Follow the manufacturer’s guidelines and consult with qualified technicians or professionals for any necessary repair or replacement procedures.
  7. Documentation and Record-keeping: Maintain accurate documentation and records of all maintenance and service activities performed on the herringbone gear system. This includes inspection reports, lubrication records, repair or replacement history, and any other relevant information. These records can serve as a reference for future maintenance, help track the gear system’s performance, and aid in troubleshooting or warranty claims if needed.

It is important to note that the specific maintenance and service requirements may vary depending on the gear system design, application, and operating conditions. Always refer to the manufacturer’s guidelines, technical documentation, and any applicable industry standards for the recommended maintenance practices and service intervals specific to your herringbone gear system.

herringbone gear

What industries commonly use herringbone gears?

Herringbone gears, also known as double helical gears, are utilized in various industries due to their unique design and advantageous characteristics. Here’s a detailed explanation of the industries that commonly use herringbone gears:

  • Power Generation and Transmission: Herringbone gears find extensive use in power generation and transmission systems. They are employed in gearboxes, drivetrains, and speed reducers that are essential components in power plants, including thermal power plants, hydroelectric power plants, and wind farms. Herringbone gears provide efficient torque transfer and smooth operation, making them suitable for power generation applications.
  • Heavy Machinery and Equipment: Herringbone gears are widely employed in heavy machinery and equipment across different industries. Applications include construction machinery, mining equipment, industrial machinery, and material handling systems. These gears can handle high loads and provide reliable torque transmission, making them suitable for heavy-duty operations.
  • Oil and Gas Industry: The oil and gas industry extensively utilizes herringbone gears in various equipment. They are found in pumps, compressors, turbines, and other machinery used in oil refineries, petrochemical plants, and offshore platforms. Herringbone gears are capable of handling high torque requirements and provide reliable performance in demanding and critical environments.
  • Marine and Shipbuilding: Herringbone gears are widely used in marine propulsion systems, including ship propulsion drives and propeller shaft arrangements. They are also found in other marine equipment, such as winches, cranes, and offshore drilling rigs. Herringbone gears facilitate efficient power transfer and contribute to the smooth and reliable operation of marine vessels.
  • Aerospace and Aviation: Herringbone gears are employed in aerospace and aviation applications where high-speed and high-torque transmission is required. They are used in aircraft engines, landing gear systems, and helicopter transmissions. Herringbone gears contribute to the efficient and reliable performance of aerospace and aviation systems.
  • Automotive and Transportation: Herringbone gears are utilized in various automotive applications that require high torque and smooth power transmission. They are found in automotive transmissions, differential gears, and drivetrain systems. Herringbone gears enable efficient power transfer and contribute to the overall performance and reliability of vehicles.
  • Printing and Packaging: Herringbone gears are commonly used in printing presses and packaging machinery. They are employed in the transmission systems that drive the rollers, cylinders, and cutting mechanisms, ensuring precise and synchronized operation. Herringbone gears’ noise-canceling properties and smooth engagement make them desirable in printing and packaging applications that require high precision and quality.
  • Steel and Metalworking: Herringbone gears are utilized in steel mills and metalworking machinery. They are found in rolling mills, extruders, forge presses, and other equipment involved in metal processing and shaping. Herringbone gears withstand the high loads, vibrations, and harsh operating conditions commonly encountered in steel and metalworking industries.
  • Railway and Transportation Systems: Herringbone gears are employed in railway systems, particularly in locomotives and rolling stock. They are used in propulsion systems, gearboxes, and drivetrains, ensuring efficient power transmission and reliable train operation. Herringbone gears contribute to the smooth and safe movement of trains.

These are just a few examples of the industries that commonly use herringbone gears. Their unique tooth design, load-carrying capacity, bidirectional power transmission capability, and smooth operation make them suitable for a wide range of industrial applications that require efficient and reliable torque transmission.

China manufacturer Rofessional Custom Hypoid Spiral Bevel Gear for Heavy Truck manufacturer China manufacturer Rofessional Custom Hypoid Spiral Bevel Gear for Heavy Truck manufacturer
editor by CX 2023-09-28

TAGs:

Herring Bone Gear

As one of the herringbone gear manufacturers, suppliers, and exporters of mechanical products, We offer herringbone gear and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of herringbone gear.

Recent Posts